Expert Answers about GMC Brake Actuator
- Replacement Surge Brake Actuator To Replace Tie Down Model 125 12,500LB Drop Actuator
- I recommend the Dexter Zinc-Plated Model 10 Brake Actuator w/ Drop to replace your current Tie Down actuator. You will need either the Disc Brake Actuator # T4750620 or Drum Brake Actuator # T2478100. These both have a similar design as your current actuator with a drop coupler attaching to a 2-5/16" hitch ball. The Drum Brake Actuator # T2478100 does not include a Electric Reverse Lockout # T4748800 but you are able to add one if needed.
view full answer... - Replacement Brake Actuator for EZ Loader Trailer with A-70 Drum Brake Actuator
- A replacement coupler option that is very similar to the existing coupler on your EZ Loader Trailer is the Dexter DX7.5L A-60, Drum, 2 Inch Ball Brake Actuator # DX33FR. Dexter acquired UFP, so actuator is essentially an updated version of your existing actuator. This actuator has a capacity of 7,500 lbs, like your existing coupler.
The main difference is the style of ball latch. the # DX33FR features a low-profile, over-center latch mechanism that will only engage will the actuator is...
view full answer... - Will The Dexter DX Brake Actuator Replace a Titan Brake Actuator For Drum Brakes?
- Yes, the Dexter DX Series Electric Over Hydraulic Brake Actuator for Drum Brakes # K71-650 will replace your Titan 68-003-00 actuator.
view full answer... - Titan Replacement Brake Actuator
- To replace your current Titan actuator you are going to need to purchase the Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit item # T4813102. The replacement actuator is out of stock and the only way to get a replacement is to buy the entire kit.
Yours was probably cut and wired which is why it is not a plug and play. To use this actuator with drum brakes you are supposed to use the Drum Brake Reducer for Titan BrakeRite Systems item # T4844100.
view full answer... - Replacement Surge Brake Actuator For Discontinued Atwood 85736 Drum Brakes
- I recommend using the Demco Hydraulic Brake Actuator # DM72VR to replace your Atwood 85736 surge brake actuator. This actuator is rated for a trailer up to 7,000lbs with drum brakes and a pole tongue up to 3" wide. The actuator will allow you to bolt it to your frame so you will be able to cut off your Atwood and drill holes for the new actuator. Be sure to verify you have a 3" wide pole tongue.
We do have a Reverse Lockout # T4748800 if you do not already have free backing brakes on...
view full answer... - Correct Master Cylinder Replacement for Model A-60 Disc Brake Actuator
- The correct replacement master cylinder for a Model A-60 Disc Brake Actuator is the Replacement Master Cylinder Assembly for Dexter Model 60 Brake Actuators part # T4820000. There's only one master cylinder, one for disc brake models and one for drum brake models. If you're having issues still after installation, I recommend making sure the brakes are bled properly without any air in the system. I have attached for you below instructions from the manufacturer on this.
"Remove the master...
view full answer... - Replacement Demco DA91 Surge Brake Actuator For a Atwood 83000 Drum Brake Actuator
- The drop on the Demco Hydraulic Brake Actuator # DM8669112 is only moving he coupler lower so you will not need as large of a rise on the tow vehicle. We do have the Demco Hydraulic Brake Actuator # DM8609101 without a drop that has all the same features. They both are rated for a tongue weight up to 800lbs, trailer weight up to 8,000lbs, have a 2" coupler, zinc coated, rated for drum brakes and have the same bolt pattern.
view full answer... - Replacement Hydraulic Drum Brake Actuator For Atwood 82543
- The Titan Brake Actuator with Manual Lockout # T63FR will be a replacement brake actuator that will fit in place of your Atwood 82543 Brake actuator. The Titan also has the 3" bolt pattern, and 2" ball coupler and manual lockout similar to your Atwood.
There is not a replacement master cylinder available for Atwood 82543.
view full answer... - Replacement Surge Brake Actuator For Demco DA603 Brake Actuator
- Based on the information I was able to find on your Demco DA603 it appears the Dexter DX7.5L A-60 Brake Actuator for Drum # DX83FR or Disc # DX56FR brakes is going to be the best replacement. The disc brake actuator includes an electric lockout while the drum brake actuator would require a Lockout Key # DX94FR if you do not have free backing brakes. Both these have a 2" coupler and are rated for 7,500lbs to fit on a 3" by 5" trailer tongue.
view full answer... - Replacement Surge Brake Actuator For a Painted Trailer With UFP A-60 Actuator
- To determine if the Dexter DX7.5 Drop-N-Go Brake Actuator # 099-175-20 will work in place of your current brake actuator you will need to verify you have enough 3" wide channel to mount the actuator. This actuator is a little shorter so depending on the length of the tongue and your payload area or boat as it may not allow you to use the other actuator.
We do have the Replacement Inner Member # DX39FR you can use to basically give you a new actuator.
view full answer... - Which Replacement Master Cylinder for Titan Model 60 Brake Actuator
- There are both drum and disc brake versions of the Titan Model 60 brake actuator available and you'll know what you have based on whether or not your trailer has drum or disc brakes. Disc brakes require higher pressure on the brake lines to actuate, so they'll have a master cylinder capable of providing higher pressure, but the only way of knowing what you really have is based off the trailer brakes.
If your trailer has drum brakes you need the Replacement Master Cylinder Assembly for...
view full answer... - Surge Brake Actuator Repair for Titan Drum Brake Actuating Coupler
- Thanks for the photos. It is clear you have a Titan brake actuator like the Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs # T63FR. It sounds like you need the Replacement Master Cylinder Assembly for Titan/UFP Brake Actuators - Drum Brakes # TK71-756-00 or Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum
# T4395100. Based on your photos it also looks like you need the Replacement Roller/Pin/Pad Kit for Titan/UFP...
view full answer... - What Brake Actuator Replaces The TDE Model LP8000 Class IV Actuator
- I do have a solution for your you. The replacement brake actuator that you need is either the Titan Zinc-Plated Brake Actuator w/ Electric Lockout - Disc - 2-5/16" Ball - 8,000 lbs, part # T4747220, which will work if your trailer has disc brakes or the Titan Zinc-Plated Brake Actuator - Drum - 2-5/16" Ball - Bolt On - 8,000 lbs, part # T4079200, which works for trailers with drum brakes.
I have included product description links and video demo links below.
view full answer... - Will Titan Brake Actuator part # T43397007K Replace a Tie Down 70E Actuator
- Yes, the Titan brake actuator part # T4339720 that you referenced will easily replace the Tie Down actuator you have now. The fitting size is the same. I attached a review video for this actuator for you to check out as well.
view full answer... - Replacement Breakaway Cable Kit for Dexter Actuator # T63FR
- The correct replacement breakaway cable kit for the Dexter brake actuator part # T63FR that you referenced is the part # DX76XR.
view full answer... - Replacement Shock for Hydraulic Trailer Brake Actuator
- I believe you are referencing a replacement shock for an actuator and from what you described it does sound like you are in need of a new one. The correct one will be a replacement for your actuator, and I'll list the replacements we carry so you can select the correct one:
- Replacement Shock for Titan Model 6 and 10 Brake Actuators # T1242600
- Replacement Shock Absorber for Titan Model 60 Brake Actuators # T2336200
- Replacement Shock Absorber Spring Kit for Titan/UFP Brake Actuators...
view full answer... - Replacement Surge Brake Actuator For a Trailer With Dico/Titan Model 60 Drum Brake Surge Actuator
- The Dexter Zinc-Plated Brake Actuator # T43397007K is a replacement for the DICO/Titan Model 60 actuator. As Dexter bought Titan this is now their version of the Model 60 actuator. This will work with the Hydraulic Trailer Brake Kit # AKUBRK-35-D but those are not free backing brake assemblies. The Brake Kit # AKFBBRK-35-D are the free backing brakes so you will not need an Electric Actuator # T4748800 to prevent the brakes from locking up in reverse.
The Kodiak Hydraulic Brake Line Kit...
view full answer... - Replacment Hydraulic Drum Brake Actuator For Demco DA66B
- The Demco Hydraulic Trailer Brake Actuator # DM72VR is the replacement for your Demco DA66B brake actuator. They have the same 2" coupler for drum brakes and attaches to a 3" channel with bolt holes spread 3" for mounting.
This coupler uses the wider EZ-Latch so you will need a larger lock like the etrailer Surge Brake Coupler Lock # e98888 to secure your trailer.
view full answer... - Replacement Master Cylinder Assembly for Dexter Brake Actuators
- The replacement master cylinder for the Model DX6.6 Disc Brake Actuator 70519 is going to be the Replacement Master Cylinder Assembly for Dexter Brake Actuators - Disc Brakes item # DX44FR. The DX6.6 used to be the model 660E brake Actuator and the Replacement Master Cylinder works with that line.
view full answer... - Replacement For UFP A-60/A-75 Disc Brake Actuator
- There is not a rebuild kit so you would need to replace your UFP A-60/A-75 disc brake actuator, with the correct one depending on if you have a 3" x 5" or 3" x 4" straight tongue:
- 3" x 5" Straight Tongue: Dexter DX7.5L A-60 Brake Actuator # DX56FR
- 3" x 4" Straight Tongue: Dexter DX7.5L A-60 Brake Actuator # DX29FR
view full answer...
Go To Results